gypsum board machine line configuration

gypsum board machine configuration:

1. Electrical control is controlled by PLC program, speed regulating motor is installed frequency conversion or electromagnetic speed regulation according to the field situation.
2. Mixer and plate forming are made of wear-resistant stainless steel, and the scraper in the mixer is inlaid with welding alloy. The mixer made by our company can produce two kinds of slurry, that is, hard edge material and intermediate honeycomb material.
3. The width of solidification belt is 1350MM× 10MM
4, The rectifying machine electronic automatic control, to ensure that the protective paper does not deviate, the marking machine according to the product
Requires thickness notch.
5, forming conveyor roller manufactured carbon steel 75 x 2.5 Ф tube, bearing adopts UCP205.
6, transit, light roller conveyor are made of carbon steel 75 x 2.5 Ф tube UCP contains bearings.
7, gypsum board machine drying room manufactured carbon steel roller Ф 60 x 2.5.
8, the return of the plate and the size of the conveyor roller using carbon steel roller.
9. One side of the drying room is fixed with insulation board, and one side is movable with insulation door. The chain is outside the drying room, so that the transmission is light, the chain and the sprocket have a long life, and the width of the drying room is compressed, the layer distance is 200MM, so as to minimize the space and make full use of the heat energy.
10. gypsum board machine Automatic palletizing machine is installed at the plate working station. Automatic palletizing machine is installed after sizing to minimize the use of personnel and reduce production costs.